GTCFibre-G4R-103

IFOTEC GTCFibre series modules allow to connect applications to an Ethernet network for remote control.

This version is particularly dedicated to the centralized management of cabinet or technical rooms housing telecommunications equipment scattered throughout an area.

Ethernet access to network connection

Five switched Ethernet ports are available to connect equipment to the network or IP devices:

• 1 optical port by SFP (SFP 100/1000Base-BX-U recommended)
• 2  10/100/1000Base-TX ports
• 2  10/100Base-TX POE+ ports

Power supply

The equipment is powered by mains and 48 VDC and allows the energy management of the premises:

• Specific interface to collect the data from power supply meters
• Internal sensor to measure the local power supply (voltage, current, active/reactive power, harmonics…)
• 48VDC battery voltage measurement

 Many inputs-outputs of command control:

• 10 opto-isolated Contact Closure (CC) inputs
• 1 isolated 0-60V analog input
• 1 analog 0-10V / 4-20mA input
• 1 input for an analog temperature sensor (included)
• 1 input for a temperature & humidity sensor (included)
• 5 opto-isolated Contact Closure outputs
• 1 PWM CC output
• 2 isolated 0-10V analog inputs
• 2 RS232/RS422/RS485 serial ports
• 1 interface port for radio communication module
• 1 USB console port

Remote control power supply:

• 3 power applications on the mains (230 VAC)

Internal battery

This product is powered by 230VAC, but in case of power failure, it can also be powered by an internal battery to keep the central unit and network accesses functional.

Advanced features in the following areas:

• Technical with many interfaces (Contact Closure or analog inputs-outputs, serial links and Ethernet…)
• Climatic  with temperature and humidity probes. Possibility to connect others sensors (smoke…)
• Security by the ability to connect surveillance cameras or other means of intrusion detection,
• Energy consumption by remote reading of the meters and  by measuring the characteristics of the power supply

Control instrument:

• Programmable events triggering (PLC- programmable logic controller), remotely controllable to optimize the climatic environment of equipment and energy consumption
• Access control management

The management of the equipment can be ensured by web server, it is also compatible with the SNMP and Syslog protocols.

The device are perfectly adapted to be installed in equipment rooms and are delivered with an analog probe (ref: GTCSonde-ANA-T) and a digital probe (ref. GTCSonde-NUM-T+H).

The GTCFibre can be fixed on a DIN rail for mounting on an electrical panel on 12 modules of width.

Below you will find all the technical documents and files available for this product:

ACCESS TO DOWNLOAD >>